Sun, 25 Sep 2022 01:48:54 UTC

Information for build libpri-1.4.13-1.fc18

ID359274
Package Namelibpri
Version1.4.13
Release1.fc18
Epoch
SummaryAn implementation of Primary Rate ISDN
Descriptionlibpri is a C implementation of the Primary Rate ISDN specification. It was based on the Bellcore specification SR-NWT-002343 for National ISDN. As of May 12, 2001, it has been tested work with NI-2, Nortel DMS-100, and Lucent 5E Custom protocols on switches from Nortel and Lucent.
Built byjcollie
State complete
Volume fedora_koji_archive00
StartedWed, 10 Oct 2012 13:56:06 UTC
CompletedWed, 10 Oct 2012 13:59:10 UTC
Taskbuild (f18-candidate, /libpri:04313396fa49f90443c599ec08835861da3887b0)
Tags
f18
RPMs
src
libpri-1.4.13-1.fc18.src.rpm (info) (download)
i686
libpri-1.4.13-1.fc18.i686.rpm (info) (download)
libpri-devel-1.4.13-1.fc18.i686.rpm (info) (download)
libpri-debuginfo-1.4.13-1.fc18.i686.rpm (info) (download)
x86_64
libpri-1.4.13-1.fc18.x86_64.rpm (info) (download)
libpri-devel-1.4.13-1.fc18.x86_64.rpm (info) (download)
libpri-debuginfo-1.4.13-1.fc18.x86_64.rpm (info) (download)
Logs
i686
build.log
root.log
state.log
x86_64
build.log
root.log
state.log
Changelog * Tue Oct 09 2012 Jeffrey Ollie <jeff@ocjtech.us> - 1.4.13-1 - The Asterisk Development Team has announced the release of libpri 1.4.13. - This release is available for immediate download at - http://downloads.asterisk.org/pub/telephony/libpri - - The release of libpri 1.4.13 resolves several issues reported by the - community and would have not been possible without your participation. - Thank you! - - The following are the issues resolved in this release: - - * --- Outgoing BRI calls fail when using Asterisk 1.8 with HA8, HB8, - and B410P cards. - (Issue AST-598. Reported by Trey Blancher) - - * --- Implement handling a multi-channel RESTART request. - (Closes issue PRI-93. Reported by Marcin Kowalczyk) - - * --- Removed MDL/TEI management configuration warning message. - (Closes issue PRI-137. Reported by Bart Coninckx) - - * --- Allow passing compiler flags (CFLAGS, LDFLAGS) - (Closes issue PRI-144. Reported by Tzafrir Cohen) - - For a full list of changes in this release, please see the ChangeLog: - - http://downloads.asterisk.org/pub/telephony/libpri/ChangeLog-1.4.13 * Thu Jul 19 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.4.12-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild * Fri Jan 13 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.4.12-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild * Wed Jul 06 2011 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.12-1 - The Asterisk Development Team announces the release of libpri version - 1.4.12. This release is available for immediate download at - http://downloads.asterisk.org/pub/telephony/libpri/ - - The following are some of the issues resolved in this release: - - * Add call transfer exchange of subaddresses support and fix PTMP call - transfer signaling. - - * Invalid PTMP redirecting signaling as TE towards NT. - - * Add Q931_IE_TIME_DATE to CONNECT message when in network mode. - (issue #18047 (JIRA PRI-114). Reported by: wuwu. Patched by rmudgett) - - * Swap of master/slave in pri_enslave() incorrect. - (issue #18769 (JIRA PRI-120). Reported by: jcollie. Patched by jcollie) - - * Fix I-frame retransmission quirks. - - * Crash if NFAS swaps D channels on a call with an active timer. - - * DMS-100 not receiving caller name anymore. - (issue #18822 (JIRA PRI-121). Reported by: cmorford. Patched by rmudgett) - - * B channel lost by incoming call in BRI NT PTMP mode. - - * Implement the mandatory T312 timer for NT PTMP broadcast SETUP calls. - - This release contains several new features, among them: - - 1.) ETSI and Q.SIG Call Completion Supplementary Service (CCSS) support - 2.) ETSI Advice Of Charge (AOC) support - 3.) ETSI Explicit Call Transfer (ECT) support - 4.) ETSI Call Waiting support for ISDN phones - 5.) ETSI Malicious Call ID support - 6.) Add Display IE text handling options. - - For a full list of changes in this release, please see the ChangeLog: - - http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.12 * Tue Feb 08 2011 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.12-0.3.beta3 - - The following are some of the issues resolved in this beta release: - - * Prevent a CONNECT message from sending a CONNECT ACKNOWLEDGE in the - wrong state. - (issue #17360. Reported by: shawkris. Patched by rmudgett) - - * Made Q.921 delay events to Q.931 if the event could immediately - generate response frames. - (closes issue #17360. Reported by: shawkris. Patched by rmudgett) - - * BRI PTMP: Active channels not cleared when the interface goes down. - (closes issue #17865. Reported by: wimpy. Patched by rmudgett) - - * Segfault in pri_schedule_del() - ctrl value is invalid. - (closes issue #17522) - (closes issue #18032. Reported by: schmoozecom. Patched by rmudgett) - - * Crash when receiving an unknown/unsupported message type. - (closes issue #17968. Reported by: gelo. Patched by rmudgett) - - * B410P gets incoming call packets on ISDN but Asterisk doesn't see the - call. - (closes issue #18232. Reported by: lelio. Patched by rmudgett) - - * SABME flood on backup D-channel in NFAS configuration. - (closes issue #18255. Reported by: bklang. Patched by rmudgett) - - * Asterisk is getting a "No D-channels available!" warning message every - 4 seconds. - (closes issue #17270. Reported by: jmls. Patched by rmudgett) - - This beta release contains several new features, among them: - - 1.) ETSI and Q.SIG Call Completion Supplementary Service (CCSS) support - 2.) ETSI Advice Of Charge (AOC) support - 3.) ETSI Explicit Call Transfer (ECT) support - 4.) ETSI Call Waiting support for ISDN phones - 5.) ETSI Malicious Call ID support - - For a full list of changes in the current release candidate, please see - the ChangeLog: - - http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.12-beta3 * Tue Feb 08 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.4.12-0.2.beta2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild * Fri Oct 08 2010 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.12-0.2.beta2 - The following are some of the issues resolved in this beta release: - - * Fix issue where calling name is not successfully processed on inbound - QSIG PRI calls from Mitel PBX. - (Closes issue #17619. Reported by: jims8650. Patched by rmudgett) - - * Added missing code specified by Q.921 (Figure B.8 Page 85) when receive - RNR in "Timer Recovery" state. - (Closes issue #16791. Reported by: alecdavis. Patched by alecdavis) - - * Fixed issue where incoming calls specifying the channel using a slot - map could not negotiate a B channel correctly. - - * Add support to receive ECMA-164 2nd edition OID name ROSE messages. - - * Fixed issue where ISDN BRI PTMP TE does not recover from line faults. - (Closes issue #17570. Reported by: jcovert. Patched by rmudgett) - - * Q.921 improvements from comparing Q.921 SDL diagrams with implementation. - - * Q.921/Q.931 message debug output improvements. - - This beta release contains several new features, among them: - - 1.) ETSI and Q.SIG Call Completion Supplementary Service (CCSS) support - 2.) ETSI Advice Of Charge (AOC) support - 3.) ETSI Explicit Call Transfer (ECT) support - 4.) ETSI Call Waiting support for ISDN phones - 5.) ETSI Malicious Call ID support - - For a full list of changes in the current release candidate, please see - the ChangeLog: - - http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.12-beta2 * Mon Aug 02 2010 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.12-0.1.beta1 - 1.4.12-beta1 - - This beta release contains some fixes and several new features, among them: - - 1.) ETSI and Q.SIG Call Completion Supplementary Service (CCSS) support - - 2.) ETSI Advice Of Charge (AOC) support - - 3.) ETSI Explicit Call Transfer (ECT) support - - 4.) ETSI Call Waiting support for ISDN phones - - 5.) ETSI Malicious Call ID support - - For a full list of changes in the current release candidate, please see - the ChangeLog: - - http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.12-beta1 * Mon Aug 02 2010 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.11.3-1 - 1.4.11.3: - This release fixes a regression in the calling number assignment logic: - - * Calling Number assignment logic change in libpri 1.4.11. Restored the old - behaviour if there is more than one calling number in the incoming SETUP - message. A network provided number is reported as ANI. - (Closes issue #17495. Reported and tested by ibercom. Patched by rmudgett) - - For a full list of changes in the current release, please see the ChangeLog: - - http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.11.3 * Thu Jun 10 2010 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.11.2-1 - 1.4.11.2: - - This release fixes situation where Q.SIG calling name in FACILITY - message was not reported to the upper layer: - - * pri_facility.c: Q.SIG calling name in FACILITY message not reported - to the upper layer. Q.SIG can send the CallingName, CalledName, and - ConnectedName in stand alone FACILITY messages. If the CallingName - was not sent in the SETUP message, the caller id name was not - reported to the upper layer. (Closes issue #17458. Reported, tested - by: jsmith. Patched by rmudgett) - - For a full list of changes in the current release, please see the - ChangeLog: - - http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.11.2 - - 1.4.11.1: - - This release fixes a regression in multi component FACILITY messages - and includes a minor bug fix for BRI spans: - - * Multi component FACILITY messages only process the first - component. The code was only processing the first ROSE component in - the facility message. (Closes issue #17428. Reported, tested by: - patrol-cz. Patched by rmudgett) - - * Inband disconnect setting does nothing on BRI spans. The - acceptinbanddisconnect flag is not inherited when creating a new TEI - and thus rendering the setting (and its respective equivalent in - Asterisk) a no-op on BRI setups. (Closes issue #15265. Reported, - patched, tested by: paravoid) - - For a full list of changes in the current release, please see the - ChangeLog: - - http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.11.1 * Wed May 26 2010 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.11-1 - This release contains many fixes and new features, among them being: - - 1.) Support for NT-PTMP BRI links, including support for multiple TEIs - and connecting of BRI phones. - - 2.) Support for allowing persistent Q.921 drops on both NT and TE PTMP - links, as well as automatically requesting that Q.921 data links - reactivate when needed by Q.931. - - 3.) T309 is enabled by default. - - 4.) Problems with Keypad Facility Digits were addressed. - - 5.) A number of additional service related features were added: - Connected Line Information, HOLD/RELEASE support, Call Deflection/Call - Rerouting, as well as partial subaddress support. They are supported in - the Q.SIG and EuroISDN switch types, and most currently require using - the trunk version of Asterisk. - - 6.) Many potential and realized Q.921 related problems, particularly - during retransmissions and other scenarios involving medium to high - packet loss. - - For a full list of changes in the current release candidates, please see - the ChangeLog: - - http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.11 * Tue Oct 20 2009 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.10.2-1 - Update to libpri 1.4.10.2 * Sat Jul 25 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.4.10-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild * Fri Apr 24 2009 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.10-1 - Update to 1.4.10 * Wed Feb 25 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.4.7-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild * Tue Aug 05 2008 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.7-1 - Update to 1.4.7 * Tue Jul 29 2008 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.6-1 - Update to 1.4.6 * Mon Feb 11 2008 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.3-2 - Rebuild for GCC 4.3 * Thu Dec 20 2007 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.3-1 - Update to 1.4.3. - Drop upstreamed patch. * Thu Nov 01 2007 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.2-1 - Update to 1.4.2 * Wed Aug 29 2007 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.1-5 - Bump release. * Wed Aug 29 2007 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.1-4 - Add patch to define size_t * Wed Aug 29 2007 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.1-3 - Update license tag. - Update URL. * Wed Aug 29 2007 Fedora Release Engineering <rel-eng at fedoraproject dot org> - 1.4.1-2 - Rebuild for selinux ppc32 issue. * Mon Jul 09 2007 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.1-1 - Update to 1.4.1 * Sat Dec 23 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.0-3 - Update to 1.4.0 final * Sat Oct 14 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.0-2.beta1 - Fix lib paths for 64 bit systems. * Sat Oct 14 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.0-1.beta1 - Get rid of pesky "." in -devel summary. - Remove zaptel-devel BR * Fri Oct 13 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.0-1.beta1 - devel package needs to Require: main package * Fri Oct 13 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.0-0.beta1 - Update to 1.4.0-beta1 * Fri Jun 02 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.2.3 - Update to 1.2.3 - Add dist tag to release - Update source URL * Wed Jan 18 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.2.2-1 - Update to 1.2.2. - Fix the spelling of Paul Komkoff Jr.'s name. * Fri Jan 13 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.2.1-4 - Eliminate the libpri-install.patch and other improvements based on suggestions from Paul Komkoff Jr. * Thu Jan 12 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.2.1-3 - Fix building on 64 bit systems. * Thu Jan 12 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.2.1-2 - Changed buildroot to meet FE packaging guidelines - Don't forget docs - Modify %post so that ldconfig dep will be picked up automatically - Add %postun so that ldconfig gets run on uninstall - Don't package the static library - Changed $RPM_BUILD_ROOT to %{buildroot} (yes, I know I was consistent before, but I prefer %{buildroot}) * Wed Jan 11 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.2.1-1 - First version for Fedora Extras